RV Humidity -- An RV Rig Killer!

A strong title, but true.  One of the major killers of RV walls is moisture in the form of humidity.  You don't even have to be using your RV it can be sitting in storage and humidity can still be present on the inside above a safe level.  Mold depends on moisture to grow and flourish. What is a person to do?  Well, the safe level of humidity for an RV is 40% or thereabouts.  So the first thing you need to do is know your current humidity level and the best way to know that is with a humidity monitor.

Humidity Monitor

In the photo for the Humidity Monitor, the screen is showing 53% which is not acceptable for an RV.  The reading shown is more likely a Sticks&Bricks house.
Now that you know what the humidity is.  What can or should you do if it is not right.  You need to try and find out the source of the moisture causing the high humidity.  People give off moisture when we breathe, but getting rid of all the kids is not an option be they fur or not.

Next showers or taking a bath gives off moisture.  Be sure that the bathroom fan is turned on during the bathing process, even in the colder months.  Wipe down the shower and bath area to reduce the amount of moisture that is evaporated back into the air of the RV.

Cooking is another moisture generator.  Keep lids on pans when cooking, to keep the moisture down, open a window a bit to let the warm moist air out, and turn on the kitchen vent if you have one.  Many of the newer RVs do not vent the stove vent to the outside.  This is not good, as an inside vented stove hood keeps the moist air inside the RV.  Do not let a tea kettle steam longer that is necessary.  Don't leave a coffee pot running all day long.  Make a cup as you need it or the coffee pot will add to the humidity in the RV all day long.

Try to locate any seals in the RV slides that is letting in outside air and seal that area.  You can cut strips of foam insulation like Reflectix or other foam insulation.  If you find caulking around the tub or shower stall or even around the kitchen/ bathroom sink is missing or cracking re-caulk using 100% silicone sealant like shown below.  This keeps water from going in the RV wood structure or supports where, if conditions are right, mold will start to grow.

100% Silicone Sealant

If it is during the colder months and your RV has single pane windows you might add Bubble Wrap to the windows.

Bubble Wrap

To install the bubble wrap do the following.

Cut the bubble wrap to the size of the window pane with scissors.
Spray a film of water on the window using a spray bottle.

Spray Bottle

Apply the bubble wrap while the window is still wet and press it into place.
The bubble side goes toward the glass.
To remove the bubble wrap, just pull it off starting from a corner.

This bubble wrap will help insulate the inside of the window from the outside of the window to further reduce moisture forming on the inside of the window when the outside air is colder than the inside air.

Do you dry clothes in the RV by hanging them in the bathroom?  Did you remember to turn on the exhaust fan?  It is not wise to dry clothes in the RV during the colder months because drying clothes adds to the amount of moisture inside the RV.  Do you have a combination washer/dryer?  Make sure the dryer is vented to the outside.  If you do not the dryer will add to the moisture in the RV.

If it possible let the RV inside temperature drop a bit in colder weather so the air inside the RV will hold less moisture.  Cooler air holds less moisture than warm air.  You may have to dress a bit warmer, but your RV investment will thank you for being a bit cooler.

Poor air circulation inside the RV can make mold grow in drawers, closets, and even cabinets.  Keep the air moving even when you are not inside your RV.  How may you ask? You can open two or more roof vents or a roof vent and crack a window so that air naturally flows in and out.  You can add a MaxxAir vent cover

MaxxAir Vent

over your current roof vents so that you can keep your vents open without rain or snow coming in the RV when the roof vent is open. You should put your RV in storage with vents cracked a little bit to allow for air movement.

If your RV does not have LED lighting you could swap out your current incandescent light bulbs for the LED equivalent.  This will reduce the about of air heating that the hotter incandescent bulbs are known for.  There is an LED replacement light for most all of the RV incandescent bulbs used in RVs. As an additional benefit, your RV battery will last longer during dry camping with LED lighting and depending on the LED light you buy you may find that the inside of your RV is now brighter with the lights on.

OK, we have talked about what not to do and some of what you can do to reduce moisture in the RV now let's get serious about stopping or greatly reducing moisture in your RV.
1. Get a dehumidifier.  They come in several sizes and types.
The ezest one to do business with is the bead type.

Eva-Dry Dehumidifier Beads

Twin Pack resealable packaging
100% silent operation
Lasts 45-60 Days
Indicator beads let you know when it's ready to be discarded.

You can spot these around the RV and in closets, cabinets, drawers where ever you feel or think moisture may be lurking.
Next, you have the mechanical dehumidifiers.

Eva-dry Electric Petite Dehumidifier Edv-1100, White

Whisper quiet
Renewable reservoir
Compact size is perfect for bathrooms, closets, and R.V.s
Low energy consumption
One of these usually works but if you have a severe problem you may want to consider two of them.

If you have an RV more than 36 feet long you may want to consider this one.

Ivation IVADM35 Powerful Thermo-Electric Dehumidifier

Squeezes Up to 20 oz. of Water a Day From Humid Air
Very Quiet Operation Due to No Moving Parts
At Capacity, Indicator Lights Up and Device Shuts Off
Compact at 4.45 pounds, 6.8" x 8.5" x 14"
For bunkhouse RVs,  you will need two.

And if you really need more moisture removal you can use a sticks and bricks type unit.

Keystone Energy Star 70 Pt. Dehumidifier

Removes up to 70 pints of moisture from the air per day
1.3-gallon water tank with transparent water level indicator, full bucket alert, and automatic shut-off when full
Removable, easy-cleaning dust filter with a clean filter alert
4 durable, rolling casters for easy movement

 It is generally felt that combinations of dry and mechanical work the best.

Well, that should about do it for this topic.  I hope you found the information helpful and can use some of the ideas presented.

Until Next Time







And finally, please remember that this blog is an Amazon affiliate. When you order something through any of the Amazon links, it doesn’t add anything to your cost, but I do earn a small commission on everything you buy. Just click on an Amazon link, then shop as usual.

Propane Gas Saving Ideas

I am sure most of you have noticed that gas of all kinds including diesel fuel is going up in price.  Many of us would like to stretch our Propane Gas as far as possible.  Well, there are some basic tricks of the RV lifestyle that can help you do just that.  You must have access to AC power (shore power) to make these tricks work.

The first one has to do with your hot water heater.  If your unit is a dual operating type (AC and Propane) force your unit to use AC whenever possible by shutting off your propane tanks. Turn your hot water heater off overnight.  The tank will keep the water hot to warm all night.

But your comment is, how will I cook anything?  The answer to that follows.

Second is to use induction cooking.  An induction cooktop uses magnetic energy to heat and cook whatever is in a pot or pan that a magnet can stick to.  For example, this Deluxe Burton Induction Cooktop is what I have and it works just great.  This is what it looks like;

Deluxe Burton Induction Cooktop

Here are some of the features of this Induction Cooktop ;

• 1800-watt high-quality induction cooktop provides 10 power levels
• Push-button controls and digital display; 180-minute timer with auto shut-off
• 10 temperature settings; overheat sensor; in-line fuse
• For use with induction-compatible cookware; the unsuitable-cookware detector
• Measures 13-2/7 by 12-1/2 by 2-3/5 inches

As mentioned in the features of the cooktop you must use cookware that a magnet will stick to.  Most cookware today is aluminum and so would not work.  You do not need a completely new set of cookware just enough to get by with using the induction cooktop.

Here is an example of Induction Cookware shown below;

Induction Cookware 

Any cookware will work as long as a refrigerator magnet will stick to the bottom of the pan or pot.  Here is a chance to go to Goodwill or other secondhand shop and make a killing on induction ready cookware.  Just be sure to bring your refrigerator magnet with you.

But you are a baker by trade and need to often use the oven that came with your Rig for that purpose.  What are you to do?  Well let's look at a solution called the Infrared Countertop Oven shown below;

Infrared Countertop Oven

Some of the features of this innovative oven are shown below;

• Digital-controlled infrared oven cooks food quickly and easily
• Cooking methods include conduction, convection, and infrared radiant heat
• No preheating, defrosting, or ventilation needed; dishwasher-safe parts
• Extender ring, cooking rack, baking pan, manual, and recipes included
• Measures approximately 14 by 14 by 16 inches
• 3-inch Extender Ring, 2-inch rack, 10-inch baking pan 
• Cooks up to a 16 Lb. turkey /141b ham with Extender Ring

So now we have the baking taken care of and we are not cooking with gas but electricity and so are saving gas and bucks ($). 

I heard you lady in the back row.  You are cold at night and need some heat so turning off the Propane gas is not an option.  Let's look at some options here as well.  

You could put one of these Mattress Heating Pads on your bed and plug into electric and sleep warm as toast all night.  These heated pads come in all the popular sizes King, Queen, and Twin.  I have shown the queen size below;

Mattress Heating Pads

Because heat rises this mattress type heating pad is much better than a heating blanket and will use less power to keep you toasty warm during the cold night. 

Ah, but you need to heat the Rig so you need more power, I mean heat.  Then you want a Ceramic Space Heater  This type of heater generates a lot of heat for very little electricity used.  The one pictured below is what I use.  I have a 30ft TT and use two of the Ceramic Heaters. One blowing toward the bedroom and one in the living room blowing toward the kitchen.  These heaters will cook you out of the Rig, they can generate so much heat.  I winter camp in North Texas and it can get below freezing, as we all found out in the winter of 2013/2014.  But even though my water hose froze outside, inside we were as warm as toast.  Shown below is the  Space Heater I have;

 Space Heater 

I have listed some of the features of this unit below;

• Ceramic space heater with adjustable thermostat for comfortable warmth—ideal for home or office
• 1500-watt high setting; 3 output options: Low, High, or Fan Only; power indicator light lets you know when it’s plugged in
• For safety: tip-over switch with auto shut-off and overheat protection with auto shut-off; ETL listed
• Carrying handle for easy transport; not for use in bathrooms, laundry areas, or other high-humidity rooms

If you have a four-legged friend (Furkid) traveling with you, please take note: this unit comes with Auto Shut-Off.  If the Ceramic Heater is tipped over the heater shuts off automatically.  This is a very important feature if you are traveling with four-footed friends.  There are some clumsy two-legged friends out there as well.

Again I remind you that these LP Gas saving tips only work if you have access to a power pedestal so you can get AC power.  With these hints, the Propane Gas becomes the backup plan and not the main source of energy for your Rig.  I know from experience that these hints and tips will work.

Until next time.

And finally, please remember that this blog is an Amazon affiliate. When you order something through any of the Amazon links, it doesn’t add anything to your cost, but I do earn a small commission on everything you buy. 

What Are Those 12-volt Sockets Good For?

We have all done it.  Left the cell phone charger sitting on the kitchen table closed the front door, made sure everything was locked up and left for our weekend RVing get away.  If you have one of those not very smartphones you know that in 8hrs or less the phone will be dead and your Hot Spot, Weather App, and every game that keeps the kids quiet during the ride will come to an end.






What to do?  Have you ever wondered what the 12 Volt Standard Wall Plate that looks like this is used for?

2 Volt Standard Wall Plate 

Or maybe you will remember this 12 volt Wall Plate with Antenna Amplifier & Switch it looks like this;

12 volt Wall Plate with Antenna Amplifier & Switch

Both of these wall plates have a 12-volt power socket just like your car, truck, or RV does.  You could plug a car charger for your phone or tablet computer into the wall plate and it would start to charge your phone or tablet computer.  Ah, but you say you have a charger for your phone already why would you need another one for the Rig?  If you remember you left it on the kitchen table and left for this trip.  OK, now what?  Well if you bought one of these 12 Volt Single Outlet USB Charger which looks like this;

12 Volt Single Outlet USB Charger

Then all you would need is either the Apple Charging Cable which looks like this;

or the Android charging cable which looks like this;

Android charging cable

and you could charge your phone, table, or any USB device and never have to worry.   You say that you need to charge two USB powered devices at the same time.  Don't worry be happy and buy a Dual USB Charger which looks like this;

 Dual USB Charger

Now all you have to do is plug in the appropriate charging cable and you are good to go.  If you need longer charging cables than 6ft you can get them up to 10ft for both Apple products and Android products.  If you would like to be able to plug the charging cable into a normal wall outlet you can buy those also.  And for those of us that want it all you can buy the USB Charging Kit Bundle  The one shown below is for Android but they have them for Apple as well.

USB Charging Kit Bundle

But they have the Apple Charging Kit Bundle as well, which is shown below;

Charging Kit Bundle

Well, that should get you going and you can just plan on leaving any of the items we talked about in the Rig for the next time you leave the charging cable and power supply on the kitchen table.


PLEASE NOTE:  The following comments may not apply to all RVs.  Without checking the wire gauge behind the socket plate there is no way to be sure that the following products can be hooked up to the 12-volt socket in your RV.

Along with the ideas above, you can use the power plug to power small appliances such as a coffee maker

12-volt coffee maker

or maybe a 12-volt frying pan.

12-volt frying pan

Maybe you are boondocking and would like to use your PS3, or some other video game or even some device that only runs on AC.  Then you would use a DC to AC converter.

DC To AC Converter

This would allow you to power Dual USB ports that can charge most phones and tablets simultaneously (Max 4.8A total output), while two grounded AC outlets (300-350W) great for charging a laptop, breast pump, nebulizer, game console, kindle, TV, DVD players, lights, iPad, and other electronic devices.

The idea here is that if the park AC power fails you can use the 12 battery that powers your rigs lights, to make coffee while you wait for the power to be restored.  While you are refueling next time at a truck stop go inside a look at all the 12-volt appliance available to the trucking community that you can use in your RV or towing vehicle. [NOTE, not all 12-volt wiring can handle 12-volt appliances.]

CAUTION:  This is not a long-term solution for power outages as your rig's battery will run down very quickly if you make dinner this way with no way to recharge your RV onboard battery now that the AC power is out.











Until next time.

And finally, please remember that this blog is an Amazon affiliate. When you order something through any of the Amazon links, it doesn’t add anything to your cost, but I do earn a small commission on everything you buy. 

Fire, Smoke, Gas, Oh MY!!!

Did you know that there is a date code on the smoke detector as well as your carbon monoxide detector in your RV?  Did you know that the propane detector in your RV has an end of life? 

I sure didn't know.  If you are just changing the detector batteries at the beginning of each RV season and removing the batteries at the end of each season you may not be doing everything you need to be safe, there is more to it.  When was the last time you tested all your detectors to be sure that they all worked? (In many cases pushing the test button on the detector does not test the most important part of the detector, the sensor.)  Do you know how to test the detectors?  When is the last time you had a fire drill in your RV? 

Let’s look for some answers.  On the back of every smoke detector, there is a date code.  You may have to hunt for it but it is there.

Beginning in 1999, Underwriters Laboratories (UL) required the manufacturing date code on the back of the device to be printed in plain English. This information may appear on the back of the device, on the face of the horn, in the battery compartment or on the top sensing chamber.

It is widely held in the RV industry that if your detector is more than five years old, or is out of date, it should be replaced. 

Some detectors have permanent batteries built-in and others need to be replaced annually.  Always use alkaline batteries when replacing batteries in detectors.  Alkaline batteries last the longest in low power usage situations, such as detectors.

Now let’s talk turkey.  Most RV manufacturers use the lowest cost, simplest smoke detector they can in their rigs.  So false alarms and the possibility of alarm failures are there.  What can you do, upgrade your standard smoke detector to a combination ionization and Photoelectric smoke particle alarm such as the

 Kidde Model Pi9010 Dual Sensing Smoke Detector . 

These alarms have fewer false alarms and will give you and your family more time to get out if there is an emergency. 

Most fire safety experts agree that you have about 20 seconds to get out of an RV that is on fire before you will be overcome and not be able to get out.

Where should I put the smoke detectors in the RV you ask?  One should be in the Master bedroom and one in the Bunkhouse (if your RV has one).  Another one should be located in the kitchen area of the rig. 

There is a new small size model smoke detector for use in storage bays or in areas where the size of the detector is important.

Photoelectric Smoke Detector

This type of small space detector is a great idea for storage areas where we may have cleaning chemicals and fire-starting chemicals and other stuff that in the right conditions can ignite and start a fire.

You can test smoke type detectors by using a burning candle near the detector and then blowing it out.  See what happens.  Also, you can push the button located on the detector to test the battery.  

Pushing the button just test the battery and the electronics and does not check the sensor inside the unit.  The candle does that.

Next, we have the Carbon Monoxide Detector.  This detector looks for the gas from combustion. CM gas is odorless, colorless, and tasteless.  This is a very deadly gas.  Every year there are deaths caused by CM gas when people run gasoline generators outside of their trailer. This detector can be located in the hallway to the bedrooms or in the bedroom itself.  Don't forget to put one in the bunkhouse. The CMD should be located off the floor about head high or higher. In my rig, the detector is located on the ceiling. The CM gas is lighter than air and will be found near the ceiling first.  Here is the one that I have  Battery Operated Carbon-Monoxide Detector. 

Battery Operated Carbon-Monoxide Detector 

NOTE: Be sure to replace the batteries at the beginning of the RV season (remove batteries at the end of the season) and keep the surface of the detector clean.

The LP Gas Detector is the last of the required detectors in your RV.  This one usually runs off of the 12-volt battery system of the RV.  It is located very near the floor usually in the hallway to the master bedroom, but not always.  This is the guy that will detect if your stove, oven, furnace, refrigerator or any other LP gas product in the RV is leaking LP into your breathing space.  LP Gas is heavier than air and sinks to the floor and builds up from there.  It has a bad odor that has been added to the gas by the LP Gas provider.  So LP Gas is not odorless, you sure can smell it.  Unless of course, you are sleeping.  If you smell gas get out, get out now, do not look for the leak just get out, and get help.

Here is a 12 volt LP Gas detector that has gotten good reviews and could replace what you are currently using if after testing yours does not work or the 5-year replacement date is up.  Remember pushing the test button on a detector does not test the sensor just the electronics and sounder.  Here is a detector that has gotten good reviews 12v LP Gas Detector.

12v LP Gas Detector

So how do you test one of these?  Remember those BIC lighters and Charcoal Starters?  Well get down near the detector and flick the BIC but do not light it.  Hold the lighter near the detector for a few seconds and you should set the alarm going.  Stop the flow of gas from the BIC and blow on the detector to dissipate the gas and the alarm should stop sounding.
A word of caution here I think is advisable.  I have heard that people are replacing the two gas detectors with one that claims it will do both jobs.  I would not want to bet my family's safety on this all in one detector.  These gasses are not the same weight in the air one gas rises and the other one sinks, now how is one detector going to be in the right place to detect the right gas?  Just say'in.

Now let's talk about firefighting.  Don't do it.  Get Out!!!  If you must fight the fire to give yourself and your family more time to get out, do you have the right fire extinguisher?  Here again, in most cases, the cheapest fire extinguisher was installed in your rig.  When was the last time you check the extinguisher?  Now is a good time before you start off for this season.  If it is a powder type, turn it over a few times to resettle the powder.  If it is a squeeze the trigger type what is the date of manufacture?  You should plan on replacing the trigger type ever six years or sooner if the gauge says so.   RVers die every year from rig fires, use the fire extinguisher to give you and your family time to get OUT not to fight the fire.

You need a fire extinguisher in each bedroom, in the kitchen area, and at the front and back door of the RV and in the storage area.  You could also have one under the driver's seat of the TV or Class A. I recommend using 

Fire Gone  

as the best, you can get to give you more time.  If the kids are old enough be sure they can operate the Fire Gone and be sure to put one in the bunkhouse.


Because of recent fire events, the following fire suppression device was developed RV Refer Compartment Fire Suppression.

RV Refer Compartment Fire Suppression

Because of the number of fires that have been caused, (or thought to have been caused) by refrigerators in RVs, an automatic fire suppression system has been developed, shown above.  This system is one the average RVer can install and will activate in the presence of a fire in the refrigerator compartment of an RV.  While you still need to get out as quickly as possible this unit may put the fire out completely or give you more time to get out either way, it is a plus.

PLEASE NOTE: I'd like to emphasize that the auto fire suppression system in this article is a halon system. It starves a fire of oxygen. It can only be used in the compartment the fridge is in. If you can see it, and it goes off, it will starve you of oxygen. So no installing it in bed or living rooms.


OK, the fire drill.  Do you know how to get out of your Rig if the front door is blocked by fire?  In each bedroom area of the rig, as well as other locations you will see a window with a red lever at the bottom.  With the word EMERGENCY EXIT printed on it.  Move the handle in the direction indicated and the window will open and you can climb out.  Of course, it will be a real job because you may have forgotten a few tools that will help make it easier. 

Did you have your emergency window prop open stick?  If you said no, you should.  Take an old broom handle, rake handle, hunk of PVC, etc, and cut it to 24" long and paint it red.  Attach two dots of hook and loop to the top and bottom of the stick and to the wall, alongside, or below the window and voila you are ready.  When the emergency occurs, open the window put in your prop stick and pull a blanket or comforter from the bed or a blanket from other area and lay it across the bottom of the window frame covering the exit handle area of the window.  This will stop you from being cut or badly scratched by the window frame as you crawl out.

Have a meeting place well outside of the rig area, that everyone knows and will meet at if there is a fire so you can take a head count and be sure everyone is safe.

Last but not the least.  Do the kids know how to get out?  Each season before you hit the road you should go over the fire safety rules and how to get out.
Rule number,
1. GET OUT
2. GET OUT
3. NEVER FIGHT THE FIRE (you have approx 20sec to get out before you can't)
4. DO NOT GO BACK FOR THE DOG, CAT or GOLDFISH
5. EVERYONE MEETS ACROSS THE ROAD

I am sure you get the picture.  Cats and dogs are part of the family for sure, but they are not humans and the kids and grandma are far more important.  Be sure to remind the kids of that.

 Fire Safety Quick Check
1. Test all Fire, LP Gas, and CM detectors
2. Do not fight the fire GET OUT!!!!
3. Know where the emergency exits are located
4. Have an escape plan
5. Have fire drills
6. Be sure the fire extinguishers are up to date






Until next time.

Don't forget to join the Weekend RVers group on Facebook a no DRAMA place with Hints, Tips, Free Stuff, Recipes, for every kind of RVer.

And finally, please remember that this blog is an Amazon affiliate. When you order something through any of the Amazon links, it doesn’t add anything to your cost, but I do earn a small commission on everything you buy. Just click on an Amazon link, then shop as usual.

Is It Level??? Is It Stable???

Is It Level??

How many times have I heard that phrase at a campground?  I can't even count them or remember them for that matter.  How do you know when your rig is level and what can you do if your rig is not?
Let's look at some of the possibilities.






The first thing you need to do is eyeball the site that you will back into or pull forward into.
Does the site appear flat?  There could be a drainage crown to the site, meaning that the center is higher than either side so that the rainwater will drain off quickly if it does rain.
Maybe there is a slope in the site toward the right or left.
All of this needs to be taken into consideration when looking at the site.
Ok, you are pulling or backing into the site and you have the support of a ground crew so getting into the site is not the problem.  The door side of the rig appears lower that the street side or is it?   How do you know? Well at some point in the life of your rig someone should have put bubble levels on it.
(For you guys with money we will discuss auto leveling equipment at the end.)

They should look like theses RV Bubble Levels

RV Bubble Levels 

If you have nothing, or what you have is so small as not to be readable then an up-grade is in order.  You should mount one of these in the front of the rig where the level can be easily seen, after taking the rig to a Walmart type parking lot and using a construction level, checking that the rig is sitting truly level before you mount the above levels to the rig.  The second level is mounted on the street side of the rig at the same height that you mounted the front of the rig level.  Be sure you have confirmed that construction level and the RV level agree that the rig is level.
Why you ask?  Because if you are more that 5 degrees out of level your RV refrigerator may not work or will not work efficiently.
But you may not have a TT maybe you have a 5th wheel and need something a bit bigger.  Enter the 5th wheel bubble level.  This is mounted on the pin box so you can see the level from the driver's seat.

5th Wheel Bubble Level

Even if you have auto-leveling on your fiver you want to start out as close to level as you can so as to not put to much stress on the self-leveling system.

Ok, you have found that the door side of the rig is low and needs to be raised up to bring that side into level.
Now the fun begins.  You will need to put something under the wheels to raise that side of the rig.  You will need what is called an RV Tire Leveling Block,

RV Tire Leveling Block

RV Tire Leveling Block

These blocks interlock so they will stay put if more than one is used and they are designed not to sink into soft soil or blacktop.  Just how many you will need to level up the low side is often just simple trial and error.
I always start with one above ground level under each tire on the low side and go from there.  Let's say that you needed two under each tire on the low side to get level.

Did you remember to pull up on them and not try to back up on them?
Better for the tires if you pull up on the leveling block rather than backing up on them.

Also, did you make sure all tires were centered on the blocks, not on an edge?
The axle of the tire or the hub in the middle of the tire should be centered on the leveling block.
Why? Because it puts less stress on the tires, that really do not like being off the ground in space.

Here is yet another way to level your Rig.  This one is a bit different that the square block used above, this one is a Ramp Style Leveling System and will help you level your rig from any increment between 1/2 inch and 4 inches.  This ramp style will hold up to 30,000 pounds.  If you have two axles then you will require two ramps per side.

Ramp Style Leveling System

The smaller ramp is used to chock the RV from moving once the RV is level.  The ramp with the holes in it, is the adjusting ramp. 

You have checked the levels on both the front and side of the rig right?  So now what?  You need to check that the fridge is level. On way to do that is to use a Torpedo Level

 Torpedo Level

This small 8" level can be used inside the fridge or on the nearest counter next to the fridge to check to be sure that the fridge is level. (Level - not more that five degrees out of level, is very important to the good, safe, and efficient operation of an RV fridge)

You are now level so what is next? Unhooking and stabilizing the rig.
Once you are unhooked you need to put down the corner stabilizer jacks.  Most travel trailers use Scissor Jacks

Scissor Jacks

This type of jack is NOT for leveling your rig.  It is to keep the rig from moving back and forth as you move around inside.  If one of the jacks does not meet the ground you can use one or more of the tire leveling blocks to help stabilize that corner of the rig.  As shown in the above photo a hand crank is the normal method of deploying this type of jack and can be a real pain.  There are two fixes for the hand crank used on these jacks.  One is the Stabilize Scissor Jack Socket for an electric or battery operated drill.

stabilizing Scissor Jack Socket

The second but more expensive way is to motorize RV scissor stabilizing jacks

motorized RV scissor stabilizing jack

This jack is remote controlled and is powered off the rig so it makes the stabilizing fast and easy.

Many of the newer 5th wheels will have will have powered corner jacks and landing jacks.  Some will have auto leveling that will level and stabilize the fiver.  But what happens when you are still getting sea sick from someone walking inside the fifth wheel or travel trailer?
For the 5th wheel, there are several things that can be used and have had success.
First is the Stabilizer Jack

5th Wheel Stabilizer Jack

I use these back at the bumper, where the bumper joins the frame of the fifth wheel.  The use of these has really made a difference in the movement of the trailer.

Next is the expandable wheel chock or X-chock.

X-Chock

This chock does double duty if you use a paddle lock to lock the chock from being removed it will stop someone from being able to steal your RV with-out a lot of work.

Your rig is now level and corner supported but, when someone walks around the inside of the rig it still does the shimmy, shimmy, shake.  Now what?  There are many suggested solutions out there to solve this problem but here is the simplest one that works.  The RV Stabilizer         

RV Stabilizer   

One of these can be added to the rear of the rig to stop side to side motion and or one can be added to the side of the rig to stop the front to back motion.  This looks simple and it is but, it does work.

The X-Chock from above will also work on Travel Trailers to help stop motion and help to prevent theft as well.

OK, now for the guys with money.  If you would like to add remote control automatic power leveling jacks to your TT or 5er, the following is a company that has received good reviews for their lift systems; Big Foot Leveling System

Big Foot Flip Down Leveling Jack for TT

The type of DIY that is required to install this system is not in the scope of this blog.  But this type of wireless remote control system is out there and for those who would like to add automatic power leveling to their rig here is a place to start.






Until Next Time

And finally, please remember that this blog is an Amazon affiliate. When you order something through any of the Amazon links, it doesn’t add anything to your cost, but I do earn a small commission on everything you buy. Just click on an Amazon link, then shop as usual.